DF300 6*4 Truck Type Borehole Drilling Rig Powered by Diesel Engine for 300m Water Well Drilling
Description:
The truck chassis of the DF300 Truck Type Borehole Drilling Rig is Dongfeng 6×4 special drilling rig chassis, whose model is DFS1251GL18, and it meets the emission standard China III. Powered by Yuchai YC6J180-33 diesel engine, it is no problem to drill 300m water wells.
Besides the DF300 6*4 Truck Type Borehole Drilling Rig, we are also specialized in suitable mud pump, air compressor and full set of drilling tools, such as drill rods, DTH hammer and bit, tricone bit, PDC bit, adaptors, etc.
Features:
1. The hydraulic system adopts an open system, and the operation of getting on and off the car is separated to avoid misoperation. It is equipped with oil temperature heater in winter and oil temperature radiator in summer to adapt to the heating and heat dissipation of hydraulic oil in different seasons.
2. This borehole drill rig adopts an auxiliary rod unloading cylinder; it is used to push the ratchet teeth of the rotary table so as to unload the thread of the drill pipe joint, and then use the rotary table to reverse the unloading rod to prevent the impact force from damaging the rig gearbox when unloading the rod.
Tehnical Parameter:
| Nominal drilling depth (M) | 300 |
| Nominal hole diameter of turntable (mm) | 500 |
| Turntable speed (r/min) | 8.6-142 |
| Turntable torque (kN.m) | 38.9-2.4 |
| Main winch single rope pulling force of (kN) | 30 |
| Lifting capacity of main hook (kN) | 240 |
| Single rope pulling force of auxiliary winch (kN) | 30 |
| Lifting force of secondary hook (kN) | 120 |
| Drill tower bearing capacity (kN) | 240 |
| Effective height of drilling tower (mm) | 11900 |
| Kelly rod (mm) | Φ108×108×7500 |
| Drill rod (mm) | Φ88.9×9.8×5500 |
| Power | Generator model | HH100/R6105AZLD-1 100kW |
| Main rig | Y225S-4 37kW/1470rpm |
| Mud pump | Y225S-4 37kW/1470rpm |
| Hydraulic pump | YE2-160M-4 11kW/1470rpm |
| Mud pump | Model | BW850/20 |
| Bore (mm) | 150 |
| Displacement (L/min) | 850, 600 |
| Pump pressure (MPa) | 2, 3 |
| Input power (kW) | 40 |
| Truck chassis | Chassis model | DFS1251GL18 |
| Chassis form | 6×4 |
| Engine | model | YC6J180-33 |
| Type | Water-cooled four-stroke supercharged and inter-cooled |
| Rated power (kW) | 132 |
| Rated speed (rpm) | 2500 |
| Dimension | Working status (mm) | 10500×2480×13700 |
| Transport state (mm) | 12500×2480×3700 |
Company Profile
Glorytek Industry (Beijing)Co.,Ltd., is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.Our factory covers an area of 250,000 square meter, construction area is about 150,000 square meter, having machining machinery, CNC processing center, friction welding machine, testing equipments etc. over 200 sets and more than 600 employees.
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering, underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.
Jane Cheng
Sales Representative
Glorytek Industry ( Beijing ) Co., Ltd.
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District, Beijing, China.
Tel: +86-10-52864265/52864786
Fax: +86-10-52037270
Mobile:+86-13426420230
Product Tags:
|
|
DF300 6*4 Borehole Drilling Rig Truck Type Powered By Diesel Engine Images
|
